Stroke Adjustment Principle Of Piston Pump

If the pump case is weighed, it can be turned over 80. Reuse. The two ends of the driven gear are not exchanged, and marks shall be made when removing it. Because the gears will have side wear. The driving gear is connected with the rotating shaft body. If the driving gear is turned over, the contact point of the meshing line of the two gears will change. Even flameout, what's the reason? It's more common to repair this fault. This is mainly due to the variable mechanism of piston pump. When the machine is running, the plunger pump is still running very fast. We always insist on reform and innovation, constantly improve the quality of operation, and continuously enhance our sustainable development. Construction forms a strong force to promote enterprise development.

High pressure pump body pneumatic control department and recycling aluminum alloy material manufacturing. The personnel of liquid receiving department should select carbon steel or stainless steel according to different environmental media. The pump's full set of seal recycling products are imported to provide high-quality development products and ensure the performance of the pump. In order to ensure the service life of the pump and prolong its service life, it is suggested to recycle the cat brand plunger pump with high pressure, large flow, compact structure, low noise, long service life, fast response and strong shock resistance; Constant pressure variable radial piston pump, which has been mass produced in recent years, is widely used in China's shipbuilding, steel, machine tools, mining, tin and magnesium industries. It is the ideal product of many piston pumps and other pumps!

The straight axis axial piston pump is the main component of the hydraulic system. It depends on the reciprocating movement of the plunger in the plunger cavity and changes the volume of the plunger cavity to achieve oil absorption and oil discharge. It is a positive displacement hydraulic pump. For straight shaft axial piston pump, plunger, slipper, oil distribution plate and cylinder block are important parts. Plunger is the main force bearing part of the slipper, which is often used in high-pressure plunger pump. It can meet the needs of high pressure and high speed. The oil distribution plate and cylinder block directly affect the efficiency and service life of the pump. Because the two pairs of high-speed motion pairs of oil distribution plate and cylinder block, slipper and plunger all adopt a hydrostatic bearing, eliminating the large capacity thrust bearing, it has the advantages of compact structure, less parts, good processability, low cost, small volume, light weight and simpler structure than radial pump. Because the straight shaft axial piston pump is easy to realize stepless variable and easy to maintain, the straight shaft axial piston pump has a great advantage in technical and economic indicators.